Vert-X 13 5V / SPI / Single

1302 7 36 2 8 1 1 02

Basic item

Technical datas

Mechanical version

Threaded bushing M10x0.75; 3.175 mm shaft, slotted; ball bearing; IP54 ( Standard )

Sensor principle

MH-C ( Standard )

Electrical angle

Electrical angle 360° ( Standard )

Power supply voltage

5 VDC ( Standard )

Output signal

SPI ( Standard )

Output characteristics

Single, positive gradient CW ( Standard )

Electrical connection

Ribbon cable, 6-pole ( Optional )

Length of cable

20 cm ( Standard )

Features

  • Compact dimensions
  • Contactless measuring method
  • Long life
  • High accuracy of measurement
  • Use in cramped installation conditions
  • Full resolution and accuracy at programmed electrical angle

Files

Technical Plans

Vert-X_1302_1332.pdf

 

Technical Files

Vert-X_1302_1332.zip

 

accessories

Fixation_clip_Vert-X_13xx.zip

 

Electrical Datas

Measuring range ° 0…360
Indep. linearity (typ.) % of measuring range ±0.3
Max. hysteresis ° 0.1
Resolution bit 14
Max. repeatability ° 0.1
Sample rate fast mode kHz 2.2
Sample rate slow mode kHz (0.55)
System propagation delay fast mode μs 400
System propagation delay slow mode μs (600)
Max. temperature coefficient of output signal ppm/K 25
MTTFd / MTBF upon request
Power supply voltage VDC 5 (±10 %)
Current consumption without load (typ.) fast mode, per channel mA 14
Current consumption without load (typ.) slow mode, per channel mA (9)
Reverse polarity protection of power supply yes
Electrical connection Ribbon cable, 6-pole
Cross section of single wires mm² 0.09 (AWG28)
Redundancy possible no

 

 

Mechanical Datas

Mechanical range ° 360 (continuous)
Protection rating IP54 / IP65
Max. starting torque at specified protection rating Ncm 0.5 / 3
Max. rotating speed rpm 6000
Min. life movements 360 Mio.
Max. permitted axial shaft load N 5
Max. permitted radial shaft load N 5
Operating & storage temperature °C -40 ... +105
Operating & storage temperature (with ribbon cable) °C -40 ... +105
Operating & storage temperature (with wires) °C -40 ... +125
EN 60068-2-6, vibration (Amax = 0.75 mm, f = 5–2,000 Hz) g 20
EN 60068-2-27, shock g 50

 

 

Standards

EN 55011, Emission (Cl. B)
EN 61000-4-2, ESD (contact discharge / air discharge) kV ±4 / ±8
EN 61000-4-3, Immission HF radiated (80–1000 MHz/1.4–2.7 GHz) V/m 100
EN 61000-4-4, Burst (on all lines) kV ±1
EN 61000-4-5, Surge (lines to ground) kV ±1
EN 61000-4-6, Immission HF conducted (0.15–80 MHz) Vemf 10
EN 61000-4-8, Immission magnetic field (50 Hz) A/m 300
Insulation resistance (500 VDC, 1 bar, 2s) GOhm 20
Dielectric strength (VAC, 50 Hz, 1 min, 1 bar) kV 1

 

 

Options

Custom shaft design
Custom modification of housing
Custom cable/wires
Sample rate in slow mode
Special electrical angle between 30 and 360° (ex factory)
Electrical angle programmable (software)
Immission magnetic field up to 1,500 A/m (additionally shielded)

Contact