Vert-X 26 8.5 ... 35V / 4 - 20mA / Single
261 1 - 7 99 1 5 2 S D6
Technical datas
Features
- Wide range of electronic and mechanical modules
- Compatible with market standards
- Fully potted electronics with high-end resin (2-chamber system)
- Custom output characteristics
- Custom versions on request
- 5 V interface with output range of 2% to 98% operating voltage possible
- Contactless measuring method
- Full redundancy available
- E1 compliant design
Files
Technical Plans
Vert-X_2611_Vert-X_2621.pdfVert-X_26_Connectors.pdf
Technical Files
Vert-X_2611_SS3.zipVert-X_2611_SD6.zip
Vert-X_2611_SQ6.zip
Vert-X_2611s_SS3.zip
Vert-X_2611r_SS3.zip
Vert-X_2611s_SQ6.zip
Vert-X_2611s_ST6.zip
Vert-X_2621_SS3.zip
Vert-X_2621_SQ6.zip
Vert-X_2621s_SS3.zip
Vert-X_26_Lever.zip
accessories
Vert-X_26_Lever.pdfVert-X_26_Guiding_ring.pdf
Vert-X_26_Tube.pdf
Electrical Datas
| Measuring range | ° | 0…360 |
| Indep. linearity (typ.) | % of measuring range | ±1 |
| Max. hysteresis | ° | 0.2 |
| Resolution | bit | 12 |
| Max. repeatability | ° | 0.1 |
| Sample rate fast mode | kHz | (5) |
| Sample rate slow mode | kHz | 1.66 |
| System propagation delay fast mode | μs | (800) |
| System propagation delay slow mode | μs | 4600 |
| Max. temperature coefficient of output signal | ppm/K | 100 |
| MTTFd / MTBF | upon request | |
| Power supply voltage (ohmic load at output = 0–0.5 kOhm) | VDC | 13.5…35 |
| Power supply voltage (ohmic load at output = 0–0.25 kOhm) | VDC | 8.5…35 |
| Current consumption without load (typ.) fast mode, per channel | mA | (19) |
| Current consumption without load (typ.) slow mode, per channel | mA | 14 |
| Max. capacitive load at output | nF | 100 |
| Reverse polarity protection of power supply | yes | |
| Electrical connection | Connector | |
| Redundancy possible | yes |
Mechanical Datas
| Mechanical range | ° | 360 (continuous) |
| Protection rating | IP68 / IP69K | |
| Max. starting torque at specified protection rating (slide bearing) | Ncm | 3 |
| Max. starting torque at specified protection rating (ball bearing) | Ncm | 0.5 |
| Max. rotating speed (slide bearing) | rpm | 120 |
| Max. rotating speed (ball bearing) | rpm | 6000 |
| Min. life (slide bearing) | movements | 50 Mio. |
| Min. life (ball bearing) | movements | 360 Mio. |
| Max. permitted axial shaft load (slide bearing/ball bearing) | N | 10 / 30 |
| Max. permitted radial shaft load (slide bearing/ball bearing) | N | 10 / 40 |
| Operating & storage temperature (5 V supply) | °C | -40…+125* |
| Operating & storage temperature (24 V supply) | °C | -40…+85 |
| EN 60068-2-6, vibration (Amax = 0.75 mm, f = 5–2,000 Hz) | g | 20 |
| EN 60068-2-27, shock | g | 50 |
| * +130°C/1h |
Standards
| EN 55011, Emission (Cl. B) | max. 30 (Kl. B) | |
| EN 61000-4-2, ESD (contact discharge / air discharge) | kV | ±4 / ±8 |
| EN 61000-4-3, Immission HF radiated (80–1000 MHz/1.4–2.7 GHz) | V/m | 100 |
| EN 61000-4-4, Burst (on all lines) | kV | ±1 |
| EN 61000-4-5, Surge (lines to ground) | kV | ±1 |
| EN 61000-4-6, Immission HF conducted (0.15–80 MHz) | Vemf | 10 |
| EN 61000-4-8, Immission magnetic field (50 Hz) | A/m | 300 |
| Insulation resistance (500 VDC, 1 bar, 2s) | GOhm | 20 |
| Dielectric strength (VAC, 50 Hz, 1 min, 1 bar) | kV | 4 |
Options
| Custom shaft design |
| Sample rate in fast mode |
| Special electrical angle between 30 and 360° (ex factory) |
| Full redundancy available |
| Indep. linearity of ±0.3% measuring range |