Vert-X 31E 5V / SPI / Single

31E5 a 7 99 2 8 1 6 02

Technical datas

Mechanical version

Magnetic actuator type 5 ( Optional )

Mounting hole

Through-hole ø4.4 mm ( Standard )

Sensor principle

MH-C ( Standard )

Electrical angle

Special angle ( Optional )

Power supply voltage

5 VDC ( Standard )

Output signal

SPI ( Standard )

Output characteristics

Single, positive gradient CW ( Standard )

Electrical connection

Round cable, 6-pole ( Standard )

Length of cable

1.0 m (cable) ( Standard )

Features

  • High protection rating IP68
  • Compact dimensions
  • Non-contacting measuring method
  • Very long life
  • High measurement accuracy
  • Can be used in harsh environments (humidity, dampness, dust, vibrations, etc.)
  • Full resolution and accuracy at programmed electrical angle
  • Magnetic loss detection (with safety flag)

Files

Technical Plans

[Translate to English:]
[Translate to English:]
[Translate to English:]
Radial_misalignment_type_5.pdf

 

Technical Files

Vert-X_31E5a.zip
Vert-X_31E5b.zip

 

Electrical Datas

Measuring range ° 0…360
Indep. linearity (typ.) % of measuring range ±0.3
Max. hysteresis ° 0.1
Resolution bit 14
Max. repeatability ° 0.1
Sample rate fast mode kHz 2.2
Sample rate slow mode kHz (0.55)
System propagation delay fast mode μs 400
System propagation delay slow mode μs (600)
Max. temperature coefficient of output signal ppm/K 25
MTTFd / MTBF upon request
Power supply voltage VDC 5 (±10%)
Current consumption without load (typ.) fast mode, per channel mA 14
Current consumption without load (typ.) slow mode, per channel mA (9)
Min. ohmic load at output kOhm -
Max. capacitive load at output nF -
Reverse polarity protection of power supply yes
Electrical connection Round cable, 6-pole
Cross section of single wires mm² 0.25 (AWG24)

 

 

Mechanical Datas

Mechanical range ° 360 (continuous)
Protection rating IP68
Min. life movements no limitation
Operating & storage temperature °C -40…+85
EN 60068-2-6, vibration (Amax = 0.75 mm, f = 5–2,000 Hz) g 50
EN 60068-2-27, shock g 200

 

 

Standards

EN 55011, Emission (Cl. B)
EN 61000-4-2, ESD (contact discharge / air discharge) kV ±4 / ±8
EN 61000-4-3, Immission HF radiated (80–1000 MHz/1.4–2.7 GHz) V/m 30
EN 61000-4-4, Burst (on all lines) kV ±1
EN 61000-4-5, Surge (lines to ground) kV ±1
EN 61000-4-6, Immission HF conducted (0.15–80 MHz) Vemf 10
EN 61000-4-8, Immission magnetic field (50 Hz) A/m 300
Insulation resistance (500 VDC, 1 bar, 2s) GOhm 20
Dielectric strength (VAC, 50 Hz, 1 min, 1 bar) kV 1

 

 

Options

Custom modification of housing
Custom cable
Custom magnetic actuator
Sample rate in slow mode
Switch functions TTL (max. 2)
Special characteristic curve
Special electrical angle between 30 and 360° (ex factory)
Electrical angle programmable (software)
Start and end point settable (additional wires)
Direction of rotation CW/CCW settable/programmable (additional wires or software)
Index point settable/programmable (additional wires or software)
Extended operating range, axial (without safety flag)

Contact