Vert-X 31E 8 ... 35V / Inkremental Push-Pull/HTL

31E5 a D 36 1 7 6 8 99

Technical datas

Mechanical version

Magnetic actuator type 5 ( Standard )

Mounting hole

Through-hole ø4.4 mm ( Standard )

Sensor principle

MH-S ( Standard )

Electrical angle

Electrical angle 360° ( Standard )

Power supply voltage

24 VDC ( Standard )

Output signal

Incremental ( Standard )

Output characteristics / output driver

Push-pull/HTL (A,B) ( Optional )

Electrical connection

Round cable, 4-pole ( Optional )

Length of cable

Special length ( Optional )

Features

  • High protection rating IP68
  • Compact dimensions
  • Non-contacting measuring method
  • Very long life
  • High measurement accuracy
  • Can be used in harsh environments (humidity, dampness, dust, vibrations, etc.)
  • Full resolution and accuracy at programmed electrical angle
  • Magnetic loss detection (with safety flag)

Files

Technical Plans

Vert-X_31E5.pdf
Vert-X_31E5a.pdf
Vert-X_31E5b.pdf
Radial_misalignment_type_5.pdf

 

Technical Files

Vert-X_31E5a.zip
Vert-X_31E5b.zip

 

Electrical Datas

Measuring range ° 0…360
Indep. linearity (without misalignment) % ±0.5
Indep. linearity (with permitted misalignment @ 360°) % ±1
Max. hysteresis ° 0.5
Resolution bit 256 (1-1024)
Max. repeatability ° 0.1
Max. temperature coefficient of output signal ppm/K 50
MTTFd / MTBF upon request
Power supply voltage VDC 8 … 35
Current consumption without load (typ.) mA 24
Max. capacitive load at output nF 1
Max. latency μs 10
Max. current at output mA 30
Reverse polarity protection of power supply yes
Electrical connection (A;B) Round cable, 4-pole
Electrical connection (A;B;Z) Round cable, 6-pole
Cross section of single wires (A;B) mm² 0.35 (AWG22)
Cross section of single wires (A;B;Z) mm2 0.25 (AWG24)
Redundancy possible no

 

 

Mechanical Datas

Mechanical range ° 360 (continuous)
Protection rating IP68
Min. life movements no limitation
Operating & storage temperature °C -40…+85
EN 60068-2-6, vibration (Amax = 0.75 mm, f = 5–2,000 Hz) g 50
EN 60068-2-27, shock g 200

 

 

Standards

EN 55011, Emission (Cl. B)
EN 61000-4-2, ESD (contact discharge / air discharge) kV ±4 / ±8
EN 61000-4-3, Immission HF radiated (80–1000 MHz/1.4–2.7 GHz) V/m 30
EN 61000-4-4, Burst (on all lines) kV ±1
EN 61000-4-5, Surge (lines to ground) kV ±1
EN 61000-4-6, Immission HF conducted (0.15–80 MHz) Vemf 10
EN 61000-4-8, Immission magnetic field (50 Hz) A/m 300
Insulation resistance (500 VDC, 1 bar, 2s) GOhm 20
Dielectric strength (VAC, 50 Hz, 1 min, 1 bar) kV 1

 

 

Options

Custom cable
Custom magnetic actuator
Custom output driver
Custom resolution (1-1024 ppr)
Higher speed on request

Contact