Vert-X 22E 5V / PWM / Single

22E1 7 36 2 4 2 5 99

Technical datas

Mechanical version

Magnetic actuator type 1 ( Optional )

Sensor principle

MH-C ( Standard )

Electrical angle

Electrical angle 360° ( Standard )

Power supply voltage

5 VDC ( Standard )

Output signal

PWM ( Standard )

Output characteristics

Single, positive gradient CCW ( Optional )

Electrical connection

Wires, 3-pole ( Standard )

Length of wires / cable / ribbon cable

Special length ( Optional )


Features

  • High protection rating IP68

  • Flat design

  • Non-contacting measuring method

  • Very long life

  • High measurement accuracy

  • Can be used in confined installation spaces

  • Full resolution and accuracy at programmed electrical angle


Electrical Datas

Measuring range ° 0…360
Indep. linearity (typ.) % of measuring range ±0.3
Max. hysteresis ° 0.1
Resolution bit 12
Max. repeatability ° 0.1
Sample rate fast mode kHz (5)
Sample rate slow mode kHz 1.66
System propagation delay fast mode μs (800)
System propagation delay slow mode μs 4600
Max. temperature coefficient of output signal ppm/K 25
MTTFd / MTBF upon request
Power supply voltage VDC 5 (±10 %)
Current consumption without load (typ.) fast mode, per channel mA (14)
Current consumption without load (typ.) slow mode, per channel mA 9
Min. ohmic load at output kOhm 10
Max. capacitive load at output nF 1
PWM frequency Hz 855 (±20%)
Reverse polarity protection of power supply yes
Electrical connection axial Wires (3x)
Electrical connection radial Round cable, 3-pole
Cross section of single wires mm² 0.25 (AWG24)
Redundancy possible yes

 


 

Mechanical Datas

Mechanical range ° 360 (continuous)
Protection rating IP68
Min. life movements no limitation
Operating & storage temperature (with ribbon cable) °C -40 ... +105
Operating & storage temperature (with cable) °C -40 ... +85
Operating & storage temperature (with wires) °C -40 ... +125
EN 60068-2-6, vibration (Amax = 0.75 mm, f = 5–2,000 Hz) g 50
EN 60068-2-27, shock g 200

 


 

Standards

EN 55011, Emission (Cl. B)
EN 61000-4-2, ESD (contact discharge / air discharge) kV ±4 / ±8
EN 61000-4-3, Immission HF radiated (80–1000 MHz/1.4–2.7 GHz) V/m 30
EN 61000-4-4, Burst (on all lines) kV ±1
EN 61000-4-5, Surge (lines to ground) kV ±1
EN 61000-4-6, Immission HF conducted (0.15–80 MHz) Vemf 10
EN 61000-4-8, Immission magnetic field (50 Hz) A/m 300
Insulation resistance (500 VDC, 1 bar, 2s) GOhm 20
Dielectric strength (VAC, 50 Hz, 1 min, 1 bar) kV 1

 


 

Options

Custom modification of housing
Custom cable/wires
Custom magnetic actuator
Sample rate in fast mode
Switch functions TTL (max. 2)
Special electrical angle between 30 and 360° (ex factory)

Contact