Vert-X 31E 11 ... 35V / 0.1 - 10V / Single

31E5 a 8 36 1 1 1 6 02

Technical datas

Mechanical version

Magnetic actuator type 5 ( Optional )

Mounting hole

Through-hole ø4.4 mm ( Standard )

Sensor principle

MH-C2 ( Standard )

Electrical angle

Electrical angle 360° ( Standard )

Power supply voltage

24 VDC ( Standard )

Output signal

0.1–10 V ( Standard )

Output characteristics

Single, positive gradient CW ( Standard )

Electrical connection

Round cable, 6-pole ( Optional )

Length of cable

1.0 m (cable) ( Standard )

*Switching outputs / Please define number (max. 127), position and width of pulses.

Features

  • High protection rating IP68
  • Compact dimensions
  • Non-contacting measuring method
  • Very long life
  • High measurement accuracy
  • Can be used in harsh environments (humidity, dampness, dust, vibrations, etc.)
  • Full resolution and accuracy at programmed electrical angle
  • Magnetic loss detection (with safety flag)

 

Features MH-C2

  • Resolution of 14bit
  • Index point(s), sense of rotation and angle settable resp. programmable by customer (optional)

Files

Technical Plans

[Translate to English:]
[Translate to English:]
[Translate to English:]
Radial_misalignment_type_5.pdf

 

Technical Files

Vert-X_31E5a.zip
Vert-X_31E5b.zip

 

Electrical Datas

Measuring range ° 0…360
Indep. linearity (typ.) % of measuring range ±0.3
Max. hysteresis ° 0.1
Max. repeatability ° 0.1
System propagation delay fast mode μs (800)
Max. temperature coefficient of output signal ppm/K 100
Power supply voltage VDC 11…35
Min. ohmic load at output kOhm 10
Max. capacitive load at output nF 100
Reverse polarity protection of power supply yes
Electrical connection -
Cross section of single wires mm² 0.56 (AWG20)
Redundancy possible no
Cross section of single wires redundant mm² -

 

 

Mechanical Datas

Mechanical range ° 360 (continuous)
Protection rating IP68
Min. life movements no limitation
Operating & storage temperature °C -40…+85
EN 60068-2-6, vibration (Amax = 0.75 mm, f = 5–2,000 Hz) g 50
EN 60068-2-27, shock g 200

 

 

Standards

EN 55011, Emission (Cl. B)
EN 61000-4-2, ESD (contact discharge / air discharge) kV ±4 / ±8
EN 61000-4-3, Immission HF radiated (80–1000 MHz/1.4–2.7 GHz) V/m 30
EN 61000-4-4, Burst (on all lines) kV ±1
EN 61000-4-5, Surge (lines to ground) kV ±1
EN 61000-4-6, Immission HF conducted (0.15–80 MHz) Vemf 10
EN 61000-4-8, Immission magnetic field (50 Hz) A/m 300
Insulation resistance (500 VDC, 1 bar, 2s) GOhm 20
Dielectric strength (VAC, 50 Hz, 1 min, 1 bar) kV 1

 

 

Options

Custom modification of housing
Custom cable
Custom magnetic actuator
Sample rate in fast mode
Special electrical angle between 30 and 360° (ex factory)
Extended operating range, axial (without safety flag)

Contact