Vert-X 88 10.8 ... 35V / 0.1 - 10V / Single

8872 7 99 1 1 1 9 02

Technical datas

Mechanical version

10 mm shaft with hexagon socket; IP68 & IP69K ( Standard )

Sensor principle

MH-C ( Standard )

Electrical angle

Special angle ( Optional )

Power supply voltage

24 VDC ( Standard )

Output signal

0.1–10 V ( Standard )

Output characteristics

Single, positive gradient CW ( Standard )

Electrical connection

Special cable ( Optional )

Length of cable

1.0 m (cable) ( Standard )

Features

  • Very robust design
  • Contactless measuring method
  • Long life
  • High measurement accuracy
  • Can be used in harsh environments (humidity, dampness, dust, vibrations, etc.)
  • Developed in line with the principles of functional safety 

 

MH-C features

  • Linearity ±0.3%
  • Resolution 12 bit
  • Full redundancy possible
  • Lower price than MH-C2

Files

Technical Plans

Vert-X_8872.pdf

 

Technical Files

Vert-X_8872.zip

 

Electrical Datas

Measuring range ° 0…360
Indep. linearity (typ.) % of measuring range ±0.3
Max. hysteresis ° 0.1
Resolution bit 12
Max. repeatability ° 0.1
Sample rate fast mode kHz (5)
Sample rate slow mode kHz 1.66
System propagation delay fast mode μs (800)
System propagation delay slow mode μs 4600
Max. temperature coefficient of output signal ppm/K 100
MTTFd / MTBF upon request
Power supply voltage VDC 10.8 ... 35
Current consumption without load (typ.) fast mode, per channel mA (19)
Current consumption without load (typ.) slow mode, per channel mA 14
Min. ohmic load at output kOhm 10
Max. capacitive load at output nF 100
Reverse polarity protection of power supply yes
Electrical connection Round cable, 3-pole
Cross section of single wires mm² 0.56 (AWG20)
Redundancy possible yes

 

 

Mechanical Datas

Mechanical range ° 360 (continuous)
Protection rating IP68 & IP69K
Max. starting torque at specified protection rating Ncm 0.5 / 6
Max. rotating speed rpm 3000
Min. life movements 360 Mio.
Max. permitted axial shaft load N 300
Max. permitted radial shaft load N 400
Operating & storage temperature °C -40 ... +85
EN 60068-2-6, vibration (Amax = 0.75 mm, f = 5–2,000 Hz) g 20
EN 60068-2-27, shock g 50

 

 

Standards

EN 55011, Emission (Cl. B)
EN 61000-4-2, ESD (contact discharge / air discharge) kV ±4 / ±8
EN 61000-4-4, Burst (on all lines) kV ±1
EN 61000-4-5, Surge (lines to ground) kV ±1
EN 61000-4-6, Immission HF conducted (0.15–80 MHz) Vemf 10
EN 61000-4-8, Immission magnetic field (50 Hz) A/m 300
Insulation resistance (500 VDC, 1 bar, 2s) GOhm 20
Dielectric strength (VAC, 50 Hz, 1 min, 1 bar) kV 1

 

 

Options

Custom shaft design
Custom modification of housing
Custom cable
Sample rate in fast mode
Switch functions TTL (max. 2)
Special electrical angle between 30 and 360° (ex factory)

Contact