Vert-X 22 5V / PWM / Single
2211 7 36 2 4 1 9 99
Technical datas
Features
- Robust design, sealed stainless steel housing
- Contactless measuring method
- Long life
- High accuracy of measurement
- Applications under adverse ambient conditions possible (humidity, dampness, dust, vibrations etc.)
- Full resolution and accuracy at programmed electrical angle
Files
Technical Plans
Vert-X_2202_2232.pdf
Technical Files
Vert-X_2202_2232.zip
accessories
Fixation_clip_Vert-X_21xx_22xx.zip
Electrical Datas
| Measuring range | ° | 0…360 |
| Indep. linearity (typ.) | % of measuring range | ±0.3 |
| Max. hysteresis | ° | 0.1 |
| Resolution | bit | 12 |
| Max. repeatability | ° | 0.1 |
| Sample rate fast mode | kHz | (5) |
| Sample rate slow mode | kHz | 1.66 |
| System propagation delay fast mode | μs | (800) |
| System propagation delay slow mode | μs | 4600 |
| Max. temperature coefficient of output signal | ppm/K | 25 |
| MTTFd / MTBF | upon request | |
| Power supply voltage | VDC | 5 (±10%) |
| Current consumption without load (typ.) fast mode, per channel | mA | (14) |
| Current consumption without load (typ.) slow mode, per channel | mA | 9 |
| Min. ohmic load at output | kOhm | 10 |
| Max. capacitive load at output | nF | 1 |
| PWM frequency | Hz | 855 (±20%) |
| Reverse polarity protection of power supply | yes | |
| Electrical connection (s = shielded) | Round cable, 3-pole, s | |
| Cross section of single wires | mm² | 0.25 (AWG24) |
| Redundancy possible | yes |
Mechanical Datas
| Mechanical range | ° | 360 (continuous) |
| Protection rating | IP54 / IP67 | |
| Max. starting torque at specified protection rating | Ncm | 0.5 / 3 |
| Max. rotating speed | rpm | 6000 |
| Min. life | movements | 360 Mio. |
| Max. permitted axial shaft load | N | 100 |
| Max. permitted radial shaft load | N | 50 |
| Operating & storage temperature | °C | -40 ... +85 |
| EN 60068-2-6, vibration (Amax = 0.75 mm, f = 5–2,000 Hz) | g | 20 |
| EN 60068-2-27, shock | g | 50 |
Standards
| EN 55011, Emission (Cl. B) | ||
| EN 61000-4-2, ESD (contact discharge / air discharge) | kV | ±4 / ±8 |
| EN 61000-4-3, Immission HF radiated (80–1000 MHz/1.4–2.7 GHz) | V/m | 30 |
| EN 61000-4-4, Burst (on all lines) | kV | ±1 |
| EN 61000-4-5, Surge (lines to ground) | kV | ±1 |
| EN 61000-4-6, Immission HF conducted (0.15–80 MHz) | Vemf | 10 |
| EN 61000-4-8, Immission magnetic field (50 Hz) | A/m | 300 |
| Insulation resistance (500 VDC, 1 bar, 2s) | GOhm | 20 |
| Dielectric strength (VAC, 50 Hz, 1 min, 1 bar) | kV | 1 |
Options
| Custom shaft design |
| Custom modification of housing |
| Custom cable |
| Sample rate in fast mode |
| Switch functions TTL (max. 2) |
| Special electrical angle between 30 and 360° (ex factory) |